SEETROLLER ULTRA

SEETROLLER ULTRA

Split Screen
Two models - M and O
Metal Bullet Camera

SEETROLLER wireless camera system can be installed in a fraction of the time, cost and hassle of a wired camera system. SEETROLLER'S battery powered camera is mounted on the forklift load backrest or on the vehicle pointing to where you want to see - NO wires to run up and down the mast!. The camera is turned on and off remotely by the equipment operator with a handheld FOB (4 included in kit). The kit also includes a timer which is factory default set to turn the camera off after 3 minutes. The manager can easily change this time out (in minutes) to suit his application. The 7" color LCD display is powered by the vehicle and comes on automatically when the signal is received from the camera and shuts off within 3 minutes of loss of signal. The battery is unplugged and recharged as necessary and provides nearly 8 hours of power.

SEETROLLER is available with up to 4 battery powered wireless cameras which all transmit to the same LCD display. When more than one camera is entered in the system the driver views a split screen.

SEETROLLER'S LCD color display is designed for the vibration issues found on mobile equipment and features a sunshade cover and adjustable mounting bracket. The color camera features LEDs that automatically come on to illuminate the target in low light conditions providing the user a green"military" type view. Clear transmission range can be up to 300' (100m) indoors with no interference issues.

SEETROLLER is easily demo'ed since it is wireless and the camera is battery powered. KEYTROLLER can provide the demo kit with a plug in transformer for powering the LCD display

Why you want one:

  • Digital transmission - NO interference - clarity on par with wired camera systems
  • No wires running up/down the forklift mast
  • Additional visibility makes operators safer with loads
  • Wireless cameras have IR LEDs that automatically illuminate in low light
  • Can support up to 4 external wireless cameras (1 camera is standard)
  • Monitor has built-in switchable view function (1-2-3 or 4 views on display)
  • Quick installation to any make or model forklift (36 - 48 VDC require converter)
  • Industry leading 150 ms signal response time - very small time delay on LCD


Features:

  • EASY TO INSTALL:
    NO WIRES OR CABLES TO RUN, BREAK OR WEAR OUT. - INSTALLS IN MINUTES!
    7” Display: 2 wires to power (12 VDC), Voltage converter required for 24--36--48 VDC
    If no signal from camera, display turns off immediately
    Includes flat surface / in-dash and adjustable universal mounts
    Cameras: Mount where you choose along with rechargeable battery pack
    Super high frame rate and digital video transmission creates crystal clear color image
  • EASY TO OPERATE:
    Have system working within minutes of installation
    Turn camera on/off with remote control FOB
    Image automatically appears when remote camera is triggered by FOB
  • DIGITAL WIRELESS TRANSMISSION:DIGITAL is MUCH higher quality video than analog with minimal interference
  • LONG TRANSMISSION RANGE:Up to 300' (100m) indoors
  • CAN ACCEPT UP TO 4 SEPARATE SPECIALIZED CAMERAS:Indoor, outdoor, infrared (night vision) All viewed on split screen on display

How it works:

  • Very simple installation - camera/switchbox is battery powered - mounts to carriage or backrest
  • No wires running up/down the forklift mast - vastly reducing installation time
  • 7” color LCD display connects to switched vehicle power (only on when ignition is on)
  • When driver needs visibility, he/she turns on external wireless camera/s with wireless FOB
  • Switchbox on wireless camera turns camera off automatically (default is 3 min, but can be changed)
  • Alternatively, driver can turn wireless cameras off at any time with FOB
  • Wireless cameras are “synched” to receiver in LCD display
  • Driver sees 1 or 2 images on a split screen on LCD display
  • Multicolor reference grid assists operator view

Benefits

  • Reduce accidents!! Forklift drivers can see load and conditions clearly from seat view of LCD display
  • Very easy to install and operate! No wires or cables up/down mast
  • Digital video is much clearer, longer transmission range, and much less interference
  • Affordable!! High quality system, reasonably priced

2 Wireless camera options (Outdoor and NEW METAL BULLET)

SEE-ULTRA-O - OUTDOOR IR CAMERA

note: Wireless cameras can be powered by battery or 12VDC input power

Kit includes:

  1. 7" LCD wireless color display with mounting bracket and sun visor
  2. IR night vision IP69 2.4GHz digital wireless camera with adjustable bracket
  3. One rechargeable lithium ion battery and time out switch box (with adjustable time out length in minutes)
  4. (2) FOBs for turning on/off wireless camera remotely
  5. One battery charger

SEE-ULTRA-M - METAL BULLET CAMERA

Kit includes:

  1. 7" LCD wireless color display with mounting bracket and sun visor
  2. METAL BULLET IP69 2.4GHz digital wireless camera with 2 hole mounting
  3. One rechargeable lithium ion battery and time out switch box (with adjustable time out length in minutes)
  4. (2) FOBs for turning on/off wireless camera remotely
  5. One battery charger


Model

Description

Dealer | End User

SEE-ULTRA-O

High Frame Rate Digital Wireless Viewing System--OUTDOOR

  1. High Frame Rate Digital OUTDOOR wireless battery powered IP 69 weatherproof IR camera and (1) 7" color LCD display and (2) remote control FOBs with RF on/off timer module and battery charger

Note: This kit does NOT include outdoor enclosure for LCD display---see option below.

$1275 $1700

SEE-ULTRA-M

High Frame Rate Digital Wireless Viewing System--METAL BULLET

  1. High Frame Rate Digital METAL BULLET wireless battery powered IP 69 weatherproof IR camera and (1) 7" color LCD display and (2) remote control FOBs with RF on/off timer module and battery charger

Note: This kit does NOT include outdoor enclosure for LCD display---see option below.

$1475 $1995

SEE-ULTRA-MCAM

Additional METAL BULLET camera

Note: if this is used as an additional camera in the system you will also need an additional battery and on/off RF timer module (neither is included in this price---outdoor camera only)

$565 $735

SEE-MCAM-BAT-T

Complete METAL BULLET camera, battery and timer combination

(frequently ordered by clients who need a 2nd, 3rd, 4th camera) NO charger included in this price!

$795 $1000

SEE-FOB

Additional remote control RF FOB

$75 $100

SEE-BAT

Additional rechargeable battery for SEETROLLER system

$95 $125

SEE-CAM-BAT-T

Complete IR camera, battery and timer combination

(frequently ordered by clients who need a 2nd, 3rd, 4th camera) NO charger included in this price!

$495 $675

SEE-ULTRA-CAM

Additional outdoor IR camera

Note: if this is used as an additional camera in the system you will also need an additional battery and on/off RF timer module (neither is included in this price---outdoor camera only)

$360 $475

SEE-CGR

Additional battery charger

$45 $60

SEE-RF-Timer

Additional RF on/off timer module with 3 wireless FOB enablers

(Note: timer is default set at 3 minutes auto turn off after it is enabled by an RF fob---settable in the modules in x# min x# sec) There is one RF timer module required for every wireless camera mounting)

$95 $125

SEE-ULTRA-LCD

7" color LCD wireless display

$650 $875

WP-ENC

Weatherproof enclosure with clear lockable cover for LCD display (Seetroller)

UV-stabilized plastic light gray base with clear PC cover

L11.81 x W7.87 x H6.29 in. / 299.97 x 199.90 x 159.77 mm

$80 $110

NOTE: All relay sensor modules are now 12VDC---be sure to order the correct MVC, HVC, or UHVC converter based on vehicle input voltage. With 12VDC vehicles you will NOT need an input converter.

HVC

Keytroller 36v-55v High Voltage Converter (Converts 36v-55v to 12v)

$60 $80

MVC

Keytroller 18v to 30vdc Voltage converter

$60 $80

KEY–LVC

Keytroller 12v Voltage Converter. This Converter works as a Noise Filter for High Electrical Noise Applications

$60 $80

Specifications - LCD Color Display:

  • Digital technology for faster transmission rate
  • 7" digital TFT LCD color monitor with Sun Visor
  • Size: 7.8" x 5" x 1.1" (199 x 128 x 28mm)
  • Input Power: 10-32VDC (converter available 36-80V)
  • Resolution: 800RGB(h) x 480(v) dot
  • Shockproof: 10G vibration rating for tough applications
  • Easy on/off sunshade cover
  • Auto pairing to wireless camera

Specifications - Wireless Cameras:

  • 1/3" 500TVL Color SHARP CMOS
  • Built in 2.4GHz digital wireless transmitter, antenna
  • Waterproof: IP69K
  • Shockproof: 10G
  • Viewing angel: 130 degrees
  • Power: Rechargeable lithium ion battery
  • Switchbox on/off remote from FOB signal
  • Outdoor IR Square: 4.1" x 2.2" x 2.7" (104 x 57 x 60mm)
  • METAL BULLET: 5" x 1" x 1.5" (127 x 24 x 36mm)

RF Remote Control FOB Specifications (Includes 2 FOBS per kit):

  • Turns on/off remote camera from operator cab
  • Pairs to only one camera - or to up to 2

Timer Specifications:

  • After the camera is turned on by a FOB, the timer begins and will shut down in X# seconds (default is 3 minutes)
  • Driver can turn OFF camera at any time with 2nd push of the FOB
  • Time out time can be easily changed using dip switch in timer box (in seconds)
Our Price: $1700.00
Camera Option
HVC converter
Quantity