KEYSHOCK - Impact Abuse Alarm for Equipment

KEYSHOCK - Impact Abuse Alarm for Equipment

KEYSHOCK Stand-Alone impact module for equipment. 3 axis accelerometer with two separate outputs for vehicle shut down or external alarms or actuation of low speed with SPEED-SAVER device. Installs on 12, 24, 36 + 48VDC forklifts. FREE PC WINDOWS SOFTWARE


Why you want one:

  • Inexpensive protection for your equipment.
  • Simple to install - Simple to calibrate - Simple to use.
  • Makes abusive operators accountable for damage.
  • Changes operator attitudes in how they operate equipment.
  • Fits easily to any make or model equipment (12 - 60VDC).

How it works:

  • Designed to act as stand-alone impact abuse module.
  • Provides indication if equipment of machine has been subjected to abusive impacts.
  • Three axis accelerometer X (front/back) Y (side/side) Z (up/down). Each can be enabled/disabled.
  • Can be set to ignore very short (ms) duration forces to "soften" set-point and reduce false alarms.
  • Two alarm outputs - alarms when impact deceleration is in excess of trigger threshold set-point.
  • Alarm software setting can be set to "latch" (stay on), pulse, output for 6 seconds, pulse for 100ms.
  • When set to "latch" (stay on) it can trigger flashing siren alarm - vehicle has been involved in impact!
  • When set to "latch" (stay on) then a key reset from supervisor is required (optional key switch).
  • "Latch" can also trigger low speed on SPEED-SAVER top speed controller or relay for shut down.
  • Removing battery input power will NOT reset the device - when power is supplied, alarm sounds.
  • Because it has 3 axis, module can be fitted horizontally or vertically (see detailed images)
  • FREE programming software connects via USB to laptop

Technical Specifications:

  • Voltage 8 - 60vdc
  • Current standby <10mA
  • Output1 Current rating 500mA
  • Output2 Current rating 500mA
  • Case: aluminum, black powder coated
  • Lead length 6ft (2.0mtrs) nominal

Options

  • SHK-KEYSW ($32) Two position reset keyswitch (includes two keys). For resetting KEYSHOCK after abusive impact event.
  • FSA ($60) Flashing Strobe-Siren Assembly
  • KEY-FOVER ($30) External relay module for use in the installation of KEYSHOCK applications that want to shut down vehicle ignition after impact event

KEY-101-SHK | KEYSHOCK
Stand-Alone impact module (shock module only). 3 axis accelerometer with two separate outputs for vehicle shut down or external alarms or actuation of low speed with SPEED-SAVER device. FREE PC WINDOWS SOFTWARE | $495

KEY-101-SHKAK | KEYSHOCK
Stand-Alone impact module with programmable (plus external FSA alarm and keyswitch for resetting alarm). 3 axis accelerometer with two separate outputs for vehicle shut down or external alarms or actuation of low speed with SPEED-SAVER device. | $588

KEY-101-SHKAKR | KEYSHOCK
Stand-Alone impact module (plus external FSA alarm, ignition shut down relay and keyswitch for resetting alarm and re-enabling ignition). 3 axis accelerometer with two separate outputs for vehicle shut down or external alarms or actuation of low speed with SPEED-SAVER device. | $628

Applications

Forklifts, construction equipment, overhead cranes, pickups, cranes, machinery.

Programmed via USB connection on laptop (FREE software)

  1. Password protected log in for settings.
  2. Enable/disable any of X-Y-Z axis.
  3. Set sensitivity for each axis independently.
  4. Set "ignore" time for each axis (ms).
  5. Set style for each output independently.
  6. View current output of each axis (helpful in setting accurate threshold).
Our Price: $495.00
Configurations
Quantity